improveHigh capacity lithium batteryThere are three ways to achieve energy density:

1, plus the specific capacity of the rechargeable battery;

2. Develop the operating voltage of rechargeable batteries.

3. The working frequency of positive materials for rechargeable batteries tends to be higher. In order to realize the system management of high-voltage rechargeable batteries, high-capacity lithium battery electrolysis is very important. It is not only necessary to meet the higher requirements for gas resistance at the same level. , and it is also necessary to take into account horizontal stability criteria that can be converted to negative values.

In order to develop the energy density of high-capacity lithium batteries, it is necessary to develop the share of positive and negative active materials in high-capacity lithium batteries. High-capacity lithium batteries are composed of positive and negative active materials, pulse dampers, copper, platinum, aluminum covers, etc., and are The most effective way to develop the share of active materials in high-capacity lithium batteries.

In addition to expanding high-capacity lithium batteries, an effective way to develop the energy density of high-capacity lithium batteries is to reduce the thickness of the film. Many high-capacity lithium battery manufacturers generally use films with thin films. The thickness of the film can be less than 20 microns, which can be used in Under the condition of ensuring the safety of high-capacity lithium batteries, the capacity ratio of the film can be greatly reduced, and the occupancy of active materials can be combined to develop the energy density of high-capacity lithium batteries.

In addition, a way to increase the proportion of active material is based on the understanding of the process of charging high-capacity lithium batteries. One is to increase the proportion of active material in the power level. In order to increase the proportion of active material, the proportion of active material must be reduced, And according to the selection of new conductive agents and adhesives, reduce the proportion of conductive agents and adhesives, and reduce the proportion of inactive substances. 2. It is necessary to add negative and negative information to adjust the glue amount.

The application of high-capacity lithium batteries improves specific energy, and the application of high-capacity lithium battery power sources should also pay attention to its testing. The characteristics of the two are closely related, so it is necessary to select a suitable contact group for current transmission and signal transmission. Spring The micro-needle beautiful touch set can be tested with high-capacity lithium batteries. It can print for a long time when transmitting large currents. The lubricating needles have excellent performance. The average use cycle is more than 20w. It should be high-capacity lithium batteries. Frequency inspection can maintain stable contact for a long time and improve inspection efficiency.